Short bed truck with a XL tent? This is for you!

• Raise your tent an additional 2" above your load bars to help clear the cab
• Designed for our modular overland bed rack
• Durable, lightweight, aluminum construction
• Durable 2-stage, textured black powder coat
• Mount to your aluminum load bars with included hardware
• Set of 4 risers and hardware

Make use of the unused bed space! 

Designed, tested and manufactured in Ontario, Canada.

• No-Drill Installation: Direct bolt-on to OEM mounting points
• Ultimate Rust Resistance: 100% aluminum construction with stainless steel hardware ensures long-lasting durability
• Epic Strength: We utilize 3/16" thick 5052 aluminum to provide molle panels that will last
  
• Outfit your Truck: Order the left, the right, or save and order multiple (bulkhead panel coming soon)
• Durable Finish: Finished in a durable, textured black powder-coat
• Modular Design: Allows the attachment of endless accessories
• MADE IN CANADA: Designed and manufactured in Ontario, Canada

Secure even the most awkward of cargo in the bed of your truck with our full length, MOLLE panels. Easily secure overland gear, MOLLE pouches, trail gear, tools, and more, by strapping or bolting directly to our panel! No more loose gear to bounce around in the bed. 

Add our MOLLE nut kit to make installation of accessories a breeze and avoid having to maneuver a wrench in behind the panel.

Cut from an industry leading 3/16" aluminum and finished in textured black powder coat, our panels will take a harder beating than other aluminum panels and won't rust like many of the steel panels.

With no drilling and no cutting required, anyone can install these in no time at all. The panels bolt to the truck using the existing tie down bolts at the front, middle and rear of the bed.

If you've had enough of your gear bouncing around in the bed while hitting your favourite trail, make use of the unused space in your truck bed and get your gear locked down with the ORO Truck Bed MOLLE Panels!

Install shown on a 2019-2022 Ranger:

Current Lead Time: In Stock

Make use of the unused bed space! 

Designed, tested and manufactured in Ontario, Canada.

• No-Drill Installation: Direct bolt-on to OEM mounting points
• Ultimate Rust Resistance: 100% aluminum construction with stainless steel hardware ensures long-lasting durability
• Epic Strength: We utilize 3/16" thick 5052 aluminum to provide molle panels that will last
  
• Outfit your Truck: Order the left, the right, or save and order multiple (bulkhead panel coming soon)
• Durable Finish: Finished in a durable, textured black powder-coat
• Modular Design: Allows the attachment of endless accessories
• MADE IN CANADA: Designed and manufactured in Ontario, Canada

Secure even the most awkward of cargo in the bed of your truck with our full length, MOLLE panels. Easily secure overland gear, MOLLE pouches, trail gear, tools, and more, by strapping or bolting directly to our panel! No more loose gear to bounce around in the bed. 

Cut from an industry leading 3/16" aluminum and finished in textured black powder coat, our panels will take a harder beating than other aluminum panels and won't rust like steel panels.

With no drilling and no cutting required, anyone can install these in no time at all. The panels bolt to the truck using the existing tie down bolts at the front and rear of the bed and the middle tie down (if equipped) is replaced with our panel support bracket.

If you've had enough of your gear bouncing around in the bed while hitting your favourite trail, make use of the unused space in your truck bed and get your gear locked down with the ORO Truck Bed MOLLE Panels!

We’ve taken our best, and made it better!

Aluminum bed rack with stainless steel hardware, makes for a rust free bed rack!

Designed, tested and manufactured in Ontario, Canada. 🍁

• Ultimate Rust Resistance: 100% aluminum construction with stainless steel hardware ensures long-lasting durability
• Adjustable for Any Truck: Upgrade your rig without needing a new rack thanks to our width adjustability.
• Tonneau Cover Compatible: Ships with mounts and hardware for mounting to t-slot tonneau covers such as the Retrax XR or the Bak Revolver X4Ts
• Quick & Simple Installation: Assemble with common tools in no time.
• Durable Finish: Finished in a durable, textured black powder-coat
• Modular Design: Allows the attachment of endless accessories

Product Overview (12" rack height shown) 

Weight Capacity

Evenly Distributed Capacity: 350 pounds dynamic and 900 pounds static, or OEM Bed Rail capacity, whichever is less. 

Mounting Hardware

Ships with required hardware to bolt onto t-slot tonneau cover rails such as:
Retrax XR
Bak Revolver X4TS
Truxedo TS

Dimensions

41″ Rack Length – suitable for compact trucks such as the Ford Maverick or anything larger
45″ Rack Length – suitable for most mid-size, short bed(5′) trucks such as the Tacoma or anything larger
55″ Rack Length – suitable for mid-size, long bed trucks(6′) or any full-size truck

It's recommended you measure the usable track length of your t-slot rail to determine the maximum rack length suitable for your truck. Reach out if you are unsure.

Tonneau Cover Compatibility

For all other tonneau covers, see our Elite Series Bed Rack - Universal page.

Soft, rollup tonneau cover shown here:

Installation Instructions:

Download instructions here

Install Video

Coming Soon

We’ve taken our best, and made it better!

Aluminum bed rack with stainless steel hardware, makes for a rust free bed rack!

Designed, tested and manufactured in Ontario, Canada.

• Ultimate Rust Resistance: 100% aluminum construction with stainless steel hardware ensures long-lasting durability
• Adjustable for almost Any Truck: Upgrade your rig without needing a new rack thanks to our width adjustability.
• Tonneau Cover Compatible: Easy to use with popular tonneau covers.
• Quick & Simple Installation: Assemble with common tools in no time.
• Durable Finish: Finished in a durable, textured black powder-coat
• Modular Design: Allows the attachment of endless accessories

Product Overview (12" rack height shown on a Ford Ranger) 

Weight Capacity

Evenly Distributed Capacity: 350 pounds dynamic and 900 pounds static, or OEM Bed Rail capacity, whichever is less. 

Mounting Hardware

We will provide one of the below mounting hardware setups to match your selection.

• No-drill clips to clamp to the bed rail for trucks without accessory rails
  
• Drill and bolt - 3/8" bolt, washers and lock nuts to securely bolt through the bed rails
• 2024+ Rail mounts utilize Ford's recommended mounting locations and can be mounted with any tonneau cover that leaves the mounting point caps exposed.

Dimensions

45" Rack Length – all short bed models
55″ Rack Length – long bed models (will not fit short bed without modification)

Load bar spacing: 
55" rack - 48-1/2" inside and 54-1/2" outside
45" rack - 38-1/2" inside and 44-1/2" outside

Want a different rack length? Order from our Elite Series Bed Rack - Universal product page instead.

Tonneau Cover Compatibility

Our Elite Series Bed Rack will work with INSIDE mounted tonneau covers that do not sit on top of the bed rail, along with a number of hard tonneau covers.
Tri-fold and quad-fold tonneau covers will NOT be able to flip open with a bed rack installed.

Our most recommended tonneau cover to pair with our bed rack is the Truxedo Pro X15 as it provides a great balance of quality, function and budget.

For a hard cover option, we love pairing our rack with the Retrax XR series tonneau covers

We also have some other options available within a wide budget range, all of which can be fit with our bed racks.

**Important note: the brackets used are 3/16″ thick. Ensure you have enough space to mount under the tonneau cover rails. Minor modifications may be required (trim plastic rail caps, etc).
Self-adhesive foam weatherstripping should be added between the bed rails and the tonneau rails to help seal the gap created by the rack brackets.

Or add our tri-fold brackets to accommodate over-the-rail tonneau covers.

Soft, rollup tonneau cover shown here:

Installation Instructions:

Download instructions here

Install Video

Coming Soon

Jeep Gladiator specific Elite Series Bed Rack

Aluminum bed rack with stainless steel hardware, makes for a rust free bed rack!

Designed, tested and manufactured in Ontario, Canada.

• Ultimate Rust Resistance: 100% aluminum construction with stainless steel hardware ensures long-lasting durability
• Adjustable for Any Truck: Upgrade your rig without needing a new rack thanks to our width adjustability.
• Tonneau Cover Compatible: Easy to use with select popular tonneau covers
• Quick & Simple Installation: Assemble with common tools in no time.
• Durable Finish: Finished in a durable, textured black powder-coat
• Modular Design: Allows the attachment of endless accessories
• Cab Height: 24" tall to support longer tents and gear

Weight Capacity

Evenly Distributed Capacity: 350 pounds dynamic and 900 pounds static, or OEM Bed Rail capacity, whichever is less. 

Mounting Hardware

Mounting hardware for factory accessory rails (Jeep Trail Rail) included. Where accessory rails don't exist, bolts and lock nuts are supplied which require 4 bolt holes to be drilled through the inner bed rail. Alternatively, you can add no-drill clips to your order if you prefer a clamp on option.

Dimensions

41″ Rack Length – shorter length can make installation with a tonneau cover easier in some cases
45″ Rack Length – will fit all Gladiators

Load bar spacing: 
41" rack - 34-1/2" inside and 40-1/2" outside
45" rack - 38-1/2" inside and 44-1/2" outside

Tonneau Cover Compatibility

Our Elite Series Bed Rack will work with INSIDE mounted tonneau covers that do not sit on top of the bed rail.
Self-adhesive foam weatherstripping should be added between the bed rails and the tonneau rails to help seal the gap created by the rack brackets.

Our most recommended tonneau cover to pair with our bed rack is the Truxedo Pro X15

**Important note: the brackets used are 3/16″ thick. Ensure you have enough space to mount under the tonneau cover rails. Minor modifications may be required (trim plastic rail caps, etc).

Or add our tri-fold brackets to accomodate over-the-rail tonneau covers. These brackets add 2.5" to the overall height of the bed rack.

Installation Instructions:

Download instructions here

Install Video

Coming Soon

Elite Series Bed Bar System V2

Low Profile, High Versatility!

Introducing our all-new Elite Series Bed Bar System V2! With a sleek, low-profile design and durable construction, it’s built to withstand any adventure.

Crafted with stainless steel brackets and aluminum crossbars, this bed bar system offers ultimate rust resistance for a maintenance-free experience.

Proudly Designed and Manufactured in Ontario, Canada. 🍁

• Ultimate Rust Resistance: Featuring stainless steel brackets and hardware paired with aluminum crossbars, this system is designed to stay rust-free.
• MOLLE Accessory Panels Included: Maximize your versatility with included MOLLE panels, perfect for mounting extra gear.
• Low Profile, 6” Rack Height: Sleek and functional, with a 6" height above the bed rail for a streamlined look.
• Tonneau Cover Compatible: Works seamlessly with popular tonneau covers, providing flexibility for any setup.
• Quick and Easy Installation: Assemble and install using just common hand tools—no hassle required.
• Durable Finish: Finished in a rugged, textured black powder-coat for enhanced durability and style.
• Modular Design: Attach a variety of accessories to customize your setup to suit any adventure.
• Adjustable Length: new with the Version 2 system is our adjustable mount MOLLE panels, allowing the bed bars to be positioned wherever you need, up to 45" apart, with a total rack length of 51".

Take your truck bed setup to the next level with the Elite Series Bed Bar System—engineered for flexibility, durability, and a clean, low-profile look!

Main changes from our original version:

• Adjustable mount MOLLE panels - space your bed bars as far, or close as you need.
• Angled MOLLE mount brackets - now angled 15 degrees, to give more clearance for mounting accessories
• Addition of our 2024+ Ranger specific mounts

Weight Capacity

Evenly Distributed Capacity: 350 pounds dynamic and 900 pounds static, or OEM Bed Rail capacity, whichever is less.

Mounting Hardware

Mounting hardware for factory accessory rails (Toyota, Nissan, Jeep Trail Rail, etc.) included. Where accessory rails don't exist, bolts and lock nuts are supplied which require 4 bolt holes to be drilled through the inner bed rail. Alternatively, you can add no-drill clips to your order if you prefer a clamp on option.

Elite Series Bed Bar System: Low Profile, High Versatility!

Introducing our all-new Elite Series Bed Bar System! With a sleek, low-profile design and durable construction, it’s built to withstand any adventure.

Crafted with stainless steel brackets and aluminum crossbars, this bed bar system offers ultimate rust resistance for a maintenance-free experience.

Proudly Designed and Manufactured in Ontario, Canada. 🍁

• Ultimate Rust Resistance: Featuring stainless steel brackets and hardware paired with aluminum crossbars, this system is designed to stay rust-free.
• Molle Accessory Panels Included: Maximize your versatility with included Molle panels, perfect for mounting extra gear.
• Low Profile, 6” Rack Height: Sleek and functional, with a 6" height above the bed rail for a streamlined look.
• Tonneau Cover Compatible: Works seamlessly with popular tonneau covers, providing flexibility for any setup.
• Quick and Easy Installation: Assemble and install using just common hand tools—no hassle required.
• Durable Finish: Finished in a rugged, textured black powder-coat for enhanced durability and style.
• Modular Design: Attach a variety of accessories to customize your setup to suit any adventure.
• Adjustable Length: Flexible crossbar spacing, adjustable from 37-3/8" to 44-3/8", adapts to different load requirements.

Take your truck bed setup to the next level with the Elite Series Bed Bar System—engineered for flexibility, durability, and a clean, low-profile look!

Weight Capacity

Evenly Distributed Capacity: 350 pounds dynamic and 900 pounds static, or OEM Bed Rail capacity, whichever is less.

Mounting Hardware

Mounting hardware for factory accessory rails (Toyota, Nissan, Jeep Trail Rail, etc.) included. Where accessory rails don't exist, bolts and lock nuts are supplied which require 4 bolt holes to be drilled through the inner bed rail. Alternatively, you can add no-drill clips to your order if you prefer a clamp on option.

We’ve taken our best, and made it better!

Aluminum bed rack with stainless steel hardware, makes for a rust free bed rack!

Designed, tested and manufactured in Ontario, Canada. 🍁

• Ultimate Rust Resistance: 100% aluminum construction with stainless steel hardware ensures long-lasting durability
• Adjustable for Any Truck: Upgrade your rig without needing a new rack thanks to our width adjustability.
• Tonneau Cover Compatible: Easy to use with popular tonneau covers, especially the Truxedo Pro X15.
• Quick & Simple Installation: Assemble with common tools in no time.
• Durable Finish: Finished in a durable, textured black powder-coat
• Modular Design: Allows the attachment of endless accessories

Product Overview (12" rack height shown) 

Weight Capacity

Evenly Distributed Capacity: 350 pounds dynamic and 900 pounds static, or OEM Bed Rail capacity, whichever is less. 

Mounting Hardware

Mounting hardware for factory accessory rails (Toyota, Nissan, Jeep Trail Rail, etc.) included. Where accessory rails don't exist, bolts and lock nuts are supplied which require 4 bolt holes to be drilled through the inner bed rail. Alternatively, you can add no-drill clips to your order if you prefer a clamp on option.

Dimensions

41″ Rack Length – suitable for compact trucks such as the Ford Maverick or anything larger
45″ Rack Length – suitable for most mid-size, short bed(5′) trucks such as the Tacoma or anything larger
55″ Rack Length – suitable for mid-size, long bed trucks(6′) or any full-size truck

For Chevrolet and GMC trucks, we recommend ordering the 41" or 45" rack depending on bed size due to the interior bed form. See chart below for fitment notes for these trucks.

Model Specific Fitment

We have added model specific product pages to help with any fitment concerns.
Following the links below will ensure you get the perfect sizing and mounting kit for your specific truck.

Chevrolet / GMC

Canyon
Colorado
Sierra
Silverado

Ford

F-150
F-250 / F-350
Maverick
Ranger

Jeep

Gladiator

Nissan

Frontier
Titan

Ram

1500
2500 / 3500

Toyota

Tacoma
Tundra

Tonneau Cover Compatibility

Our Elite Series Bed Rack will work with INSIDE mounted tonneau covers that do not sit on top of the bed rail.
Self-adhesive foam weatherstripping should be added between the bed rails and the tonneau rails to help seal the gap created by the rack brackets.

Our most recommended tonneau cover to pair with our bed rack is the Truxedo Pro X15

**Important note: the brackets used are 3/16″ thick. Ensure you have enough space to mount under the tonneau cover rails. Minor modifications may be required (trim plastic rail caps, etc).

Or add our tri-fold brackets to accomodate over-the-rail tonneau covers.

Soft, rollup tonneau cover shown here:

Installation Instructions:

Download instructions here

Install Video

Coming Soon